-
Senior Member
First Start (finally)
Hi all,
After years of watching you all posting your first starts and after 3 years (and 1 week) working on my build, I was finally able to bring my beast to life !!
It took a couple of turns to bring it to life, then some adjustments to the fuel regulator to for a more successful second start.
Here's take 1 …
Here's take 2 …
will post separatly
(hopefully I did the links correctly)
Overall very successful start. I have a couple of pouch list items to chase (including a cooling question which I will post separately).
Here's some photos out in the sun (for the first time)
First Start_1.jpg
First Start_2.jpg
Thanks to you all for all the help and support to get to this point.
Can't want to do some go carting ...
Mk4 #9165, Base Kit with lots of options, Delivery on 08/17/2017, Coyote, TKO600, 2015 IRS, 18" Halibrands, 12.99" Wilwoods

-
Post Thanks / Like - 0 Thanks, 2 Likes
-
Senior Member
Mk4 #9165, Base Kit with lots of options, Delivery on 08/17/2017, Coyote, TKO600, 2015 IRS, 18" Halibrands, 12.99" Wilwoods

-
Post Thanks / Like - 0 Thanks, 1 Likes
-
-
Senior Member
can't see video but either way really dig that dual air intake. cool!
Build 1: MKIV #7275 Gen 2 Coyote TK600, IRS 3.55 2020 Graduated
Build 2: Gen3 65 Coupe: Arrived June 2024. Gen 2 Coyote, T56, IRS 3.55
-
Senior Member
fixed the videos (new to the youtube thing)
Mk4 #9165, Base Kit with lots of options, Delivery on 08/17/2017, Coyote, TKO600, 2015 IRS, 18" Halibrands, 12.99" Wilwoods

-
Senior Member
Way to go. Congratulations!
Build 1: Mk3 Roadster #5125. Sold 11/08/2014.
Build 2: Mk4 Roadster #7750. Sold 04/10/2017.
Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020.
Build Thread and
Video.
Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020.
Build Thread and
Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023.
Build Thread. Sold 11/9/2023.
-
-
Senior Member
FFR9280RD MK4 base kit, 2004 Mach 1 donor, PS, PB, ABS, TC, CC, PATS, Summit heater, DIY wire diet, RT pedal/trunk/turn signal, FFR LCAs, FFR 3-link, 17x9 FR500s all around, Ford Magnetic Gray with custom Kandy Orange stripes (Ken's Custom Auto Body)
-
Senior Member
Mk4 complete kit #9059 ordered 1/19/17 delivered 3/23/17, 2015 IRS, Fortes/DART347,TKO 600, hyd clutch, P/S, 12.88 wilwood brakes front and rear, heater/defrost and vintage gauges
First start and go-cart 4/11/18. Taken To Whitby Motorcars Greensboro, N.C. 2/5/21 for body/paint
-
Member
Sounds awesome, CONGRATS!
-

Steve >> aka: GoDadGo
You Coyote Guys Amaze Me!
...Congratualations!
-
Well done. Congratulations.
-Steve
-
Congratulations on a happy day.
Which air intake tube do you have your MAF sensor mounted in?
For some reason, I do not think that is going to work, unless the sensor is down stream of the Y, which will be very close to the throttle body.
I had trouble with my MAF sensor being too close to the throttle body and had to move it.
I am not a FI expert, just what I have encountered with my cars.
If you get your tune from Lund, send them a picture and they can advise. It was helpful for me.
20th Anniversary Mk IV, A50XS Coyote, TKO 600, Trunk Drop Box, Trunk Battery Box, Cubby Hole, Seat Heaters, Radiator hanger and shroud.
-
That's awesome. Congratulations! I can't wait for the day that I get to that point in my build.
MkIV Roadster build: Gen 2 Coyote, IRS, TKO600. Ordered 10/24/18. Delivered 1/29/19. Engine installed 8/8/21. First start 9/12/21. First go-kart 9/17/21. Off to paint 4/11/22. Back from paint 12/30/22.
Build thread here.
-
Senior Member
great job! Never get tired of watching these!
MK4 #8900 - complete kit - Coyote, TKO600, IRS - Delivered 6/28/16 First Start 10/6/16 Go cart - 10/16/16 Build completed - 4/26/17 - 302 days to build my 302 CI Coyote Cobra - Registered and street legal 5/17/17
Build Thread
http://thefactoryfiveforum.com/showt...e-build-thread
PHIL 4:13 INSTAGRAM - @scottsrides
-
Senior Member
awesome! I had my first start and engine break-in this weekend too! 289 flat tappet cam.
-
Congratulations! Sounds vicious!
Mark IV Complete kit delivered 7/7/20
Blueprint 427 ordered 11/23/20
-
Senior Member
Yep, what wareaglescott said! All down hill from here. Congrats!
Dj
-
Senior Member
Thanks all.
Feels good, real good (sounds good too
)
Hope so, I could a little down hill momentum ...
Congratulations on a happy day.
Which air intake tube do you have your MAF sensor mounted in?
For some reason, I do not think that is going to work, unless the sensor is down stream of the Y, which will be very close to the throttle body.
I had trouble with my MAF sensor being too close to the throttle body and had to move it.
I am not a FI expert, just what I have encountered with my cars.
If you get your tune from Lund, send them a picture and they can advise. It was helpful for me.
Mounted on the driver side. Truth be told the passage side is a dummy (just for looks
) so the MAF should work like normal (that's the idea anyway).
Heads up, I need to post a couple questions separate on thread as I need some help from the experts ...
Mk4 #9165, Base Kit with lots of options, Delivery on 08/17/2017, Coyote, TKO600, 2015 IRS, 18" Halibrands, 12.99" Wilwoods

-
Now that's a sweet sound... Congratulations!
-
Senior Member
It's a beautiful sound. Congrats.