Visit our community sponsor
Thanks:
0
Likes:
0
-
Senior Member
Got a few things done today. Got a floor pan for the fuel tank area from one of the custom vendors (Kootenai). Obviously I had to remove the fuel tank which gave me some easier access to shore up a few items underneath that area. Sprayed the underside of the pan with undercoating. Reinstalling the fuel tank got very tight, so tight in fact I had to use a block of wood and a rather large hammer to reinstall. Used a valve cover grommet to protect the fuel and vent lines. Also UPS brought me a new starter and like everything else it didn't fit the first attempt. The good news though is you can rotate the nose on the starter and mount it in any position. Pretty cool.
Are you guys sealing the battery access panel or making it removable?
P8210014.JPGP8210015.JPGP8210016.JPGP8210017.JPGP8210018.JPGP8210019.JPG
Last edited by Boz1911; 08-21-2013 at 06:39 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor