Redfogo's 818C build

[redfogo]

You attached a cable end onto a cut cable? Do you have a pic of that?

For the throttle body end I found some DIY cable links at autozone. The kit comes with a few different sizes for different linkage size. All you need to do is feed your FFR cable through the hole cut the extra cable off and use the provided screw to hold the line in place. If your extra paranoid like me just throw some solder on the end of the wire to help hold it in place. The screw should be more then enough though. Set to how you like it, I set mine with zero slack so pedal has no play in it. INSTANT POWER!!!!

I also was able to get my TB to open up 100% doing it this way. I know some guys had issued with it getting open fully because of how much slack FFR had put into the provided line.