I know alot of you have seen me on the forum for the past couple months, and would just like to say Thanks for all the good info put in my order yesterday and expect dilivery around begin Sept. Let the games begin. Willy
Visit our community sponsor
I know alot of you have seen me on the forum for the past couple months, and would just like to say Thanks for all the good info put in my order yesterday and expect dilivery around begin Sept. Let the games begin. Willy
Sincere thanks and congrats, you have a huge cadre of people to get help and inspiration from. My favorite car in the world (with the exception of my 68 vw bus) is my blue 65 Coupe sitting in the showroom right now. It spent two years at Ford Racing and is now back home. Thanks again and we'll build a great car for you!
Dave Smith, FFR 001
President
Factory Five Racing
Albeit biased, Dave is right. You have just ordered the coolest car in the world. Contrats!!!!
Your jacket will be forthcoming I'm sure...
Andrew
Congratulations, and welcome to the Coupe community!!! Yes, it's indeed the "coolest" car on the planet....Wear your jacket proudly!
Karen
#28 FFR Challenge Series
#28 FFR Type-65 Coupe
2011 Western Endurance Racing Championship
2010 West Coast Champion
Drive it.....Like you stole it!
Welcome aboard Willy. It's a great build with many challenges that will make you really consider what you want to do with the car. There are many options available and some great vendors here to support you with the necessary bits and pieces. The rest of us will help you spend any money you left in your pockets.
It's never too early to start beefing up your obituary.
Willy,
Welcome to coupe fun ... this site is a tremendous resource for build questions as well as highly qualified vendors. These cars generate huge amounts of attention, so plan on gas stops taking a little longer as people gather round to ask questions, etc.
Garry
I sure miss my coupe!
F5R1004503SP 2004 Challenge Car, 331 Stroker
Coupe # 031, 422" Windsor stroker by Southern Automotive (Dash autographed by Peter Brock)***SOLD***
Unique 427 Roadster, 482" Aluminum FE by Southern Automotive***SOLD***
Willy,
Let me put in my congrats too. IMO the Coupe guys and gals are an extremely close knit group of builders and you are in more-than-capable hands in asking them for help. I look forward to watching your build come together.
Somebody get this guy his straightjacket!
FFR 5369 Pin Drive, IRS, Trigos, Torsen, Wilwoods, FMS BOSS 302 "B" cam , Mass-flo. CA SB100 (SPCN) Registered
Delivered 4/23/06. "Finished" 4/2012 (still not done!)
I'm sure Hank will have your size and will be here soon to give it to you. :-)
Welcome to the coupe group, we love having another full fledge member and congrats on the new arrival!
Awesome Willy!!! I have to say the community has been great and opened up their garages to me and my wife when we were trying to decide (mine is being picked up by Stewart Monday). If it weren't for this great group of builders we probably wouldn't have jumped in. I'm looking forward to watching your build.
Tim
Congratulations on the order! You've got just enough time to read every thread on this and the other site, and to get used to posting pictures to a build blog. Get busy!
Coupe #497 delivered 7/29/10. Engine in on 10/1/10. Pushcart on 10/4/10. First start on 12/01/10. First go-cart on 12/31/10. Finished and on the road as of February 2012.
Coupe Body Buck Plans - My Spray Booth - Painting Lessons Learned
Build site: www.bamacoupe.blogspot.com
Lots of build photos and some observations: http://www.flickr.com/photos/53614858@N05/
Willy:
Do you reside near South Florida?
Raise your right hand and say after me,
"I Willy (Last Name), do swear/affirm, that upon acceptance of this "Revered Coupe Jacket", will willingly subject myself to all manner of frustration and abrasion that my FFR Type 65 will provide. I further pledge that any and all fellow Coupe builders will have free reign in using the cash available in my wallet as they see fit to improve my build plan. I will not look down upon our fellow Roadster builders, but rather take pity on those not talented enough to build a race car with a roof, So Help Me God!"
Willy,
It is my pleasure to present you with the "Revered Coupe Jacket", Here's your sign!!
Hank
“If you didn’t have enough time to do it right the first time. How come you always have time to go back and do it again?” FFR1000186CP
Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall and torque is how far you take the wall with you.
Welcome You are required by the coupe builders law to tell us what part of the world you will be going nuts in.
Built to be driven.
Thanks for the welcome , live in Wyoimg, maybe the first coupe in the state. Hankl I am sure everybody will have many ideas on how to spend my money and don't be so hard on the roadsters , somebody has to be second
Last edited by willy; 07-10-2011 at 09:50 AM.
Wyoming! Ya Hooo!!! Sounds like another good reason for a road trip! We clipped into a corner of Wyoming on a run to Yellowstone NP with the Utah Cobra Club a couple of years ago...Logged more than 1,000 miles in three days....Beautiful state! We'll be watching your build and cheering you on....Get ready for some fun!
Karen
Last edited by vnmsss; 07-10-2011 at 11:08 AM.
#28 FFR Challenge Series
#28 FFR Type-65 Coupe
2011 Western Endurance Racing Championship
2010 West Coast Champion
Drive it.....Like you stole it!
Welcome Willy, as the next to the newest coupe builder I'm sure we will have some similar experiences. My coupe is due to be delivered the first week of August or so.
Bob
Welcome Willy!
FFR Daytona Type 65 Coupe
67 427 Cobra
57' Belair
72 Pinto Wagon ,306" 1/4 miler
34 5 window coupe Ford
2003 Mustang GT
99' ZX9
85 Goldwing
All toys still in the Scuderia!
Every Saint has a past..................every sinner a future
Don't take yourself so seriously........no one else does.
You never see a motorcycle parked outside a Psychiatrists office.
Welcome aboard.
Chris
If it's too LOUD....you're too OLD!!
Build Site >> http://www.flickr.com/photos/51103049@N00/collections/
FFR#0441CP Complete Coupe kit, IRS, T-5, 392ci 351W, Webers, Delivered 4/29/09
Welcome Willy. Share with pics, we like pics!
John
We began our build in May and we are in Central Florida. Anybody close to us?
How do you prep the underside of the body on a Gen 2 body.
What are you going to do with the underside? Nothing really happens for prep if your undercoating, there is no release wax on the underside but it will need to be scothchbright padded or sanded to give it some tooth if your going to apply paint or even skim it with bodyfiller. Lots o work to skim the bonnet but it sure looks nice when its smooth and painted under there, adds a bit of weight too though...HTH Steven
FFR Daytona Type 65 Coupe
67 427 Cobra
57' Belair
72 Pinto Wagon ,306" 1/4 miler
34 5 window coupe Ford
2003 Mustang GT
99' ZX9
85 Goldwing
All toys still in the Scuderia!
Every Saint has a past..................every sinner a future
Don't take yourself so seriously........no one else does.
You never see a motorcycle parked outside a Psychiatrists office.