818
Visit our community sponsor
818
Last edited by bigger; 06-15-2022 at 01:11 PM.
there is an air box on his intercooler
would anyone know who made that ?
818S #343 Delivered 5-20-2015
First Start 10-17-2015
First Drive 10-17-2017 ( 100 feet back and forth until I can get off driveway)
First Drive with a non leaking tuned motor 11-12-2015 (wow)
Passed NJ State constructed inspection 8/30/2016
Great to see the 818 getting a bit of recognition (and a beautiful one at that). iWire posted a few photos of it a few months ago:
http://thefactoryfiveforum.com/showt...l=1#post254476
Seems like his AAIC is working.
He says what sounds like "Ilk fab." No idea what it ACTUALLY is....
https://youtu.be/XvylxsSzkDE?t=3m42s
Guess it IS Ilk....
https://wheelwell.com/john-gamble/1o...ive-racing-818
Heard about it on Road & Track: http://www.roadandtrack.com/car-cult...ru-wrx-engine/
I'm glad to see someone finally made a pressurized plenum to feed the stock location AAIC. A lot of us talked about that years ago but no one ever did it. Coupe certainly has more space to do it.
Zero Decibel Motorsports
Check out my new website!
www.zerodecibelmotorsports.com
www.facebook.com/zero.decibel.motorsports
Those harnesses have "I'm going to slide right under you" written all over them....
818S - #67 (SOLD IT!)
Delivered: 18 November 2013
Go Karted: 29 December 2013
Titled/Registered: 28 March 2014
Finished: NEVER!
341 hp @ 4844 RPM / 389 tq @ 3717 RPM
818S/C : Chassis #25 with 06 WRX 2.5 turbo, ABS, cruise, PS, A/C, Apple CarPlay, rear camera, power windows & locks, leather & other complexities. Sold 10/19 with 5,800 miles.
Mk3 Roadster #6228 4.6L, T45, IRS, PS, PB, ABS, Cruise, Koni's, 17" Halibrands, red w/ silver - 9K miles then sold @ Barrett-Jackson Jan 2011 (got back cash spent).
When we say to our customers "if there is anything you need, please ask," we mean it.
iWire Subaru Wiring Services
Over 100 Custom 818 Wiring Harnesses Built
http://www.iwireservices.com/factory...18-wiring-kits
[email protected]
Anyone know what this car has for shifter setup that elicited the positive comments during the video?
Per the link above, it's the Factory Five shifter.
818S - #67 (SOLD IT!)
Delivered: 18 November 2013
Go Karted: 29 December 2013
Titled/Registered: 28 March 2014
Finished: NEVER!
341 hp @ 4844 RPM / 389 tq @ 3717 RPM
I was more curious about linkage routing and whether bell-crank was used. I'm surprised to hear the stock system getting praise based on everything I have read on this forum, but I have never used one so I have no basis of comparison against my K-tuned/0dB/factory routing setup.
I'm guessing its the upgraded aluminum shifter that ffr sells. If they think that's really tight and positive that's an understatement.