Visit our community sponsor
Thanks:
0
Likes:
0
-
Originally Posted by
TouchStone
How did you add the support to the hood?
I simply went to my local auto parts store and bought a siamesed tube of panel adhesive(2 part epoxy) to glue the balsa wood to the hood bottom. 50 grit sandpaper to prep, then fit the wood. I sawed grooves in the planks 4/5 of the way through, allowing the wood to conform to the contour of the hood. After gluing the wood to the hood, I filled the saw grooves with the same panel adhesive, effectively locking in the contours. After all that, another round of 50 grit in prep for the fiberglass. 3 layers of glass cloth & resin completed the job. It's so stiff now, it's unbelievable.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor