How Concerned Should I be Over These Issues?

[Papa]

As I continue working to get the car assembled and the body fit, I came across a few items that will obviously need to be addressed, but how concerned should I be about them coming through the paint in the future?

This is the passenger side turn signal location. There is a lot of stress on the body at this location with the mounting bracket directly behind it.



This is at the curve at the front of the passenger door recess. This was delivered to me like this and there is a noticeable divot on the back side where the material was laid in far too thin.



This one is in a similar location on the driver side door recess.



Finally, what can I do to get a better fit on the splash guards?