Well okay got all that other stuff sorted out. Driver side is on the way to complete but I hit a snag. Literally. The passenger side hub won’t go on the spindle. The driver side went on without an taps but the passenger side went about a 1/2” on and won’t go any further. A light tap does nothing. Miraculously after 30 min of coherencing I got it off looks unharmed and the spindle looks fine. Now what....

863DA2F8-12F5-4BF8-82DD-2A58ED59EF69.jpg

A58A2ED6-06D0-461F-B505-A358848DBD44.jpg