-
Senior Member
Rob, FWIW...
What gauge sheet metal are you using for the bracket? That looks pretty thin, not that it would not work but it might flex quite a bit and vibrate when engine is running. I was less than 8" from the bracket with a CNC setup using a single piece of 1/8" aluminum which is solid and does not flex. If you wanted to have another option you could go with a Jamar that is more compact than your current setup. I might consider something a little more stout to hold the reservoirs. Just my .02 I am definitely no expert on this and I might overkill stuff.
https://www.kartek.com/parts/jamar-p...nd-clutch.html
Last edited by Fman; 01-24-2021 at 10:07 PM.
-
Post Thanks / Like - 1 Thanks, 0 Likes