Ordered a plug for the side of my tko, it did not come with a screw. Anyone know the screw size and pitch? Car is sitting on the ground and would be really hard to figure out at this point....
Visit our community sponsor
Ordered a plug for the side of my tko, it did not come with a screw. Anyone know the screw size and pitch? Car is sitting on the ground and would be really hard to figure out at this point....
I have the TKO, but it is installed and buried in the car. I would suggest a call to Tremec.
Jazzman
MKIV #8745 "Flip Top" Roadster, Custom Tilt front, Coyote Engine, Tremec TKO600, Custom Interior. Best of Show winner, Huntington Beach Cruise In 2018.
1967 Ford Mustang Coupe build thread updated 1/22/2021
Roadster Frame Dolly Plan
I just found one in my hardware bin that fit. I'm going to guess it was a 5/16, but cant say if it was 18 or 24 tpi. If nobody answers by this afternoon, I'll pop the bolt out n let ya know.
---Boyd---
MkIV #9042 build thread
www.boss427.us
427W, TKO600, Moser 3.55 rear.
Delivered Feb 2017, Graduated Nov 4, 2019
I've purchased them from Mike Forte, and they came with a machine screw. You could call him and ask. 5/16 sounds right, and don't believe it's a fine pitch. Couldn't find any documentation that gives the thread size. Mine too is installed and buried. Here's a picture of one FWIW: http://www.speedwaymotors.com/Tremec...ns,107161.html
Build 1: Mk3 Roadster #5125. Sold 11/08/2014. Build 2: Mk4 Roadster #7750. Sold 04/10/2017. Build Thread
Build 3: Mk4 Roadster 20th Anniversary #8674. Sold 09/07/2020. Build Thread and Video. Build 4: Gen 3 Type 65 Coupe #59. Gen 3 Coyote. Legal 03/04/2020. Build Thread and Video
Build 5: 35 Hot Rod Truck #138. LS3 and 4L65E auto. Rcvd 01/05/2021. Legal 04/20/2023. Build Thread. Sold 11/9/2023.
I use one of these almost every day I work on the car. Super handy
INCH & METRIC BOLT GAUGE WITH THREAD PITCH GAUGE (L GAUGE) - 2 PIECES https://www.amazon.com/dp/B01GBZ1K4C..._o.Lszb3M8ECZZ
James
FFR33 #997 (Gen1 chassis, Gen2 body), license plate DRIVE IT says it all! build thread
My build: 350SBC, TKO600, hardtop, no fenders/hood, 32 grill, 3 link, sway bars, 355/30r19
Previous cars: GTD40, Cobra, tubeframe 55 Chevy, 66 Nova, 56 F100
I can look at mine this evening, but I dont have a way of measuring if it is fine or course
MK4 #9028 - Coyote - TKO600
Delivery: 1/30/17 First Start: 7/23/17 Legal: 10/5/17 Graduated: 10/15/18
Build thread: http://thefactoryfiveforum.com/showt...8-Build-Thread
Well... The Tremec manual shows a part no. of 99796-0616, but it doesn't give the spec. Go figure.
If Brute Force doesn't work, you're not using enough of it.
Basic Stuff: MK4 Complete Kit #8439, Wilwood's, 17" Halibrands. Extra Stuff: Stainless brake and fuel lines, Breeze cooling, Battery mount, SS Roll Bar. Old Fart Stuff: Heater, Seat Heaters, Footbox Fresh Air, Stereo, Keyless ignition, Power Steering, Hyd Clutch.
Young & Dumb Stuff: 427w Dart, TKO600, 3 link Moser M9/Ford 9", 3.5:1, Eaton TruTrac Posi. Graduation Thread
Her is the one I got from Forte with his speedo plug
Looks like 1/4
MK4 #9028 - Coyote - TKO600
Delivery: 1/30/17 First Start: 7/23/17 Legal: 10/5/17 Graduated: 10/15/18
Build thread: http://thefactoryfiveforum.com/showt...8-Build-Thread
Thanks guys. I had ordered the plug from Mike, but I did not receive a screw.