Visit our community sponsor
Thanks:
0
Likes:
0
-
Not a waxer
It's all coming back together nicely David! When you get ready to do the wiper cuts on Phil's car try this...I put the jig in place then use a long 3/16" bit to make a series of holes around it's I.D. Lift the jig, "connect the dots" and finish shape the hole with a small sanding drum on a Dremel. Although I always do the cutouts prior to paint this method would not scare me in the least on a painted body. I use white lithium grease on the cables.
Good luck!
Jeff
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Visit our community sponsor