-
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Junior Member
Looks beautiful! Great job.
FFR1286K. I completed and licensed the Mark I in 2006. Full carbon fiber body. I painted it Crystal Blue Mica. Fuel injected 302 Ford engine balanced and blueprinted, GT40 intake manifold, GT40 heads and lots of performance parts, aluminum radiator, T5 transmission, 3:55 limited slip differential, Cobra disc brakes (4 wheel), Cobra R wheels, 16 gallon fuel cell, Lexan windshield, Cobra Monaco S FIA seats, RCI racing seatbelts.
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Congratulations on not only finishing, but on the beauty of your car. Hope you have many years of driving with it.
MK4 delivered 2/24/2017. Complete kit #9023,IRS, Power Steering, Leather, heater, 17" wheels, sway bar ft & rr, tremec 600 and Gordon Levy Racing SBF 427. First start and go kart 8/19/2017. Graduated 1/15/2018
MK4 #9230 complete kit delivered 1/27/2018. IRS, PS, leather, Tremic 600, SBF 427. Graduation 10/15/2018
MK3 #5253 donor bought unfinished. SBF 331, T5 Trans.
-
Post Thanks / Like - 1 Thanks, 1 Likes
-
Good lookin machine. Congratulations!!
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Not a waxer
Well done! Now go enjoy the ride
Jeff
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Senior Member
Looks great. Congrats.
Where is the front splitter from?
MK4 #8900 - complete kit - Coyote, TKO600, IRS - Delivered 6/28/16 First Start 10/6/16 Go cart - 10/16/16 Build completed - 4/26/17 - 302 days to build my 302 CI Coyote Cobra - Registered and street legal 5/17/17
Build Thread
http://thefactoryfiveforum.com/showt...e-build-thread
PHIL 4:13 INSTAGRAM - @scottsrides
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Senior Member
Congrats! Very nice and I like the third brake light.
Kyle
Complete Kit pickup 09/05/2015, 351w, QF680, 3.55, 3-Link, 15" Halibrands with MT's, Painted Viking blue with Wimbledon white stripes on 03/15/2017. Sold in 08/2018 and totally regret it.
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Senior Member
Excellent work, enjoy it!
JR
Mk4 complete kit #9059 ordered 1/19/17 delivered 3/23/17, 2015 IRS, Fortes/DART347,TKO 600, hyd clutch, P/S, 12.88 wilwood brakes front and rear, heater/defrost and vintage gauges
First start and go-cart 4/11/18. Taken To Whitby Motorcars Greensboro, N.C. 2/5/21 for body/paint
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Steve >> aka: GoDadGo
I totally get the life getting in the way issues so;
Congratulations & Thanks For The Motivation!
Also, I've got the same stereo in my build.
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Originally Posted by
wareaglescott
Looks great. Congrats.
Where is the front splitter from?
Thanks. The front spoiler was made by William Hough Composites in 2007. He was on the FFCARS.com forum, not sure if it is still available.
-
Beautiful car. I love the interior colors and the 3rd brake light.
MkIV complete kit #9259, Coyote, TKO600, IRS, Wilwoods x 4, many parts from Breeze, Forte, Russ's Garage and North Racecars
17" Bullit style wheels, custom Kirkey seats, mid shift conversion, drop trunk, KRC power steering, Forte Hyd. clutch and slave, manual brakes
overall build plan: build it to drive, not polish and black it out wherever possible, paint will be some shade of dark cherry
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Originally Posted by
sbhunter
Beautiful car. I love the interior colors and the 3rd brake light.
Thanks, 3rd brake light is a Hella item from Australia (the only place I could find it).
-
Senior Member
Mk4 #9165, Base Kit with lots of options, Delivery on 08/17/2017, Coyote, TKO600, 2015 IRS, 18" Halibrands, 12.99" Wilwoods
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Congratulations. 10 years well spent. Way to persevere
-Steve
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Member
Well done, no matter how long it. The tail light is cool. I noticed your mirror is mounted to the top of the windshield, I wish I would have done that. Enjoy it.
Purchased and un-assembled Mk3 in 2016. 5.0, Aluminum heads, Performer RPM Air gap, Quick Fuel 650 carb, BBK headers T5, 3.55 rear solid axle, Koni Shocks, PS with Hydra-boost. Also own two restored vintage Mustangs, two Model A fords, 1941 Chevy truck and several other hot rods.
-
Congratulations, it is absolutely beautiful
"Doddmoore," Mitchell Moore on facebook, Follow Tonks347Cobra on Instagram
MK IV Complete kit, SB Ford 347, Holley Sniper EFI, TKO 500, Moser 8.8 Solid axle, Wilwoods, Power Steering
My Build Thread:
Tonks347, The Baker's Build
Slow and steady wins the race.
-
Great job!
I really like this!
Bob
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
On a roll
Looks great! I like your dash as well. (I, too, went the wood finish route, except mine isn't done yet!)
Mk IV Roadster - #8650 - delivered 7-17-2015 - first start 7-28-2018 - first go-kart 10-13-2018 - licensed and on the road 9-9-19: body/paint completed 3-17-2020.
Complete kit / 2015 Coyote / TKO600 / IRS / Wilwood brakes / Mid-Shift mod / Power Steering / Heater and Seat Heaters / RT turn signal / Breeze radiator shroud and mount
-
Senior Member
Congratulations Wade!
What seats are those?
And where is the link to your build thread?
Chris
Mark IV Roadster #7679
Coyote 5.0, T56, Hydraulic Clutch, IRS, Torsen Diff, Wilwoods, Hydraboost, ABS Power Brakes, Power Steering, & tons more extras.
-
Senior Member
Looks great! Congrats!
David
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
Originally Posted by
Al_C
Looks great! I like your dash as well. (I, too, went the wood finish route, except mine isn't done yet!)
Thanks. Dash is not wood, it is automotive leather from ebay.
-
Originally Posted by
chrisarella
Congratulations Wade!
What seats are those?
And where is the link to your build thread?
Thanks. Seats are from a 2005 Corvette.
Sorry, no build thread.
-
Wonderful Job
Wonderful Job. I saw Factory Five's Facebook page shared that very nice picture at the Train Station Inn.
I am also from Nova Scotia and I am planning a build in my future.
I was wondering what the importation of the kit was like? Did you have any major headaches getting it to your door?
Last edited by Nazarite; 07-09-2018 at 08:40 AM.
Reason: Typos Galore
-
Senior Member
Worth the wait! CONGRATS!!! BEAUTIFUL CAR!!!
Gen3 Coupe - SOLD Arrival:
6/21/18 SOLD: 4/12/2019
Current Vehicle: 2014 SRT Viper (modded to the moon), 2022 TRX, 2022 RS6, E46 LS3 M3
Current Projects: Superlite/RCR GTR ***FOR SALE***
@madd_wrapps on IG or
www.maddwrapps.com
-
Member
Great looking car!
Enjoy-
Larry Johnson
Colleyville, Texas (DFW area)
2016 Mark IV complete kit
Delivered March 3, 2016
New 2016 Roush Coyote engine w/453 hp
2016 IRS, Tremec T600 mid shifter
-
Senior Member
Good job. It looks great!
Started dreaming of a Cobra around 1987
Purchased Complete Kit 6/9/2017, Delivered 9/4/2017, Rolling Chassis 3/30/2018, Engine Dyno'ed 3/4/2022, Engine installed 8/27/2022, First start 6/13/2024, Go Kart 8/19/2024
Click here for my build thread
Serial #9158
Design Engineer at BluePrint Engines
-
No major issues with importing the kit. I took a truck and trailer to Factory Five to pick up the kit.
-
Originally Posted by
Nazarite
Wonderful Job. I saw Factory Five's Facebook page shared that very nice picture at the Train Station Inn.
I am also from Nova Scotia and I am planning a build in my future.
I was wondering what the importation of the kit was like? Did you have any major headaches getting it to your door?
See my reply above.